Available in sizes( 1.2m 15hp)(2m 25hp)(2.4m 30hp)

The TRILO VCU150 verticutting unit is mounted on a robust steel frame which can be linked to a category I or II three point hitch. The VCU150 has a working width of 1,50 meter and can be used behind a tractor from 22 HP (14 kW). A Walterscheid PTO shaft with shear bolt powers the chain driven axles. The verticutting depth can be easily adjusted through a threaded spindle on both sides of the unit. The VCU150 can optionally be equipped with floating wheels at the back and a flexible 3 point linkage for even better contour following. The VCU150 can easily handle a thatch layer of up to 4 cm deep.



 Technical specifications

 PTO output: > 22 hp

PTO: 540 RPM

Drive: Power take-off

Three point hitch: Cat. I

Weight: 248 kg

Measurements (LxWxH): 1,70 x 0,80 x 0,90 m

Working width:1,50 m

Number of knives: 56 / 47 / 29

Diameter knives: Ø 270 mm

Knive thickness: 2 mm Tungsten Tips or 3 mm Manganese steel

Knive distance: 25 / 30 / 50 mm

Front roller diameter: Ø 120 mm

Weight set: 2 x 22 kg

Working depth: Max. 40 mm