Description

Slanetrac SA800 Swivel Trim Hedge Cutter

see video

see link to slanetrac

The SA800 Swivel Trim, allows you to quickly convert a front loader to a hedge trimmer, its quick and easy system allowing you to perform neat hedge trimming.

The SA800 connects to the machine hydraulics so a suitable hydraulic flow is necessary for proper operation. The solenoid valve allows for the change over between the powering the hedge cutter and adjusting the angle of the hedge cutter from horizontal to vertical

This product has a spring break away which protects the cutting head. it is very easy to use because you are cutting straight ahead of you and the steering is very responsive to your cut. You can reach good heights with your loader and cutter bar combination, so you get a neat and even cut. By removing one pin, you can easily swivel the head to the opposite side. This allows you to cut down behind fences and it also allows you to cut into corners. This operation is very difficult with other hedge cutters.

Specs can

2950mm reach

oil flow from 35lts

height depending on machine operation

Used on

Neomach nova x30 and up

Avant 400 series and up

Giant d254sw and up

on several tractor models with 3rd function